great for polishing granite, marble etc natural stone without water
MOQ :
1 SetPayment Method :
Credit card, paypal, western union, bank transfer etcLead Time :
About one weekApplication :
for stone and concreteMaterial :
Premium quality diamond and resinGrit :
30#-3000#Size :
3"Product Introduction:
Diamond resin polishing pad are shiny when new. This shine must disappear in order for the pad to perform their best, especially with the finer grits (400 and up). To do this, run any new pad on a rough surface - such as granite, sandstone or concrete - always making sure there is enough coolant (water). This will force the outer bond to be eroded, leaving the diamonds properly exposed for polishing. They will gradually perform even better as normal wear sets in.
Step: From #50 to #3000. Then buff if necessary.
Speed: about 4000 RPM .
Important point:
• Never skip grit sizes during the polishing process. Skipping grit sizes will result in an unsatisfactory finish to the stone.
• Diamond polishing pads wear out prematurely due to over working of the material or by not using a sufficient amount of water.
• Failure to spend adequate time polishing with each grit size pad will result in an unsatisfactory finish.
• Selection of the Velcro rubber backer pad for shaping and curved work is highly recommended. Use rigid backer pad for straight edge and flat face material.
• Product not listed from us are available as special order items.
Features:
1. Diameter: 3", 4", 5", 6", 7" (80mm, 100mm, 125mm, 150mm, 180mm)
2. Thickness:2mm working thickness;
3. Grit:50#, 100#, 200#, 400#, 800#, 1500#, 3000#, Buff;
4. Usage: Used in dry conditions;
5. Application: Granite, marble, engineered stone, concrete etc;
6. Backing color coded, color can be customized;
7. Logo design are available and printed on the backing
8. 2000-4500 RPM.
Advantages:
1. Removes scratches from all natural stone
2. Premium cooling technology
3. Ideal for professional contractors and DIY users
4. Flexible pad for easy work and high polishing performance
Packages: